The VIP X1 XF E encoders feature DVD-like quality H.264 video, at up to 25/30 images per second, over IP networks. The devices support PAL and NTSC sources and offer a basic motion detector. The encoders provide bidirectional audio communication in parallel to video.
They also provide Dual Streaming and therefore are able to generate two independently configurable video streams. The devices are ultra-compact, so they are perfect for any application that depends on spacesaving solutions.
Bosch VIP X1 XF E Single-channel Video Encoder
- Single-channel H.264 encoder with Dual Streaming
- SD card and iSCSI recording
- Multicast and Internet streaming
- Alarm input and relay output
- ONVIF conformant
VIP X1 XF E Single-channel Video Encoder
Input/output
Video/1 x input
| • connector | BNC |
|---|---|
| • impedance | 75 ohm, switchable |
| • signal | Analog composite, 0.7 to 1.2 Vpp, NTSC or PAL |
Audio/1 x mono line in, 1 x mono line out
| • connector | 3.5 mm stereo jack |
|---|---|
| • signal line in | 9 kohm typical, 5.5 Vpp max |
| • signal line out | 3.0 Vpp at 10 kohm typical, 2.3 Vpp at 32 ohm typical, 1.7 Vpp at 16 ohm typical |
AAC
| • Profile | AAC-LC |
|---|---|
| • Frequency rate | 300 Hz to 6.4 kHz |
| • Data rate | 48/80 kbps at 16 kHz sampling rate |
G.711
| • Frequency range | 300 Hz to 3.4 kHz |
|---|---|
| • Data rate | 80 kbps at 8 kHz sampling rate |
L16
| • Frequency range | 300 Hz to 6.4 kHz |
|---|---|
| • Data rate | 640 kbps at 16 kHz sampling rate |
| Signal-to-noise ratio | > 50 dB |
| Alarm | 2 x input |
| • connector | Clamp (non-isolated closing contact) |
| • activation resistance | 10 ohm max |
| Relay | 1 x output |
| • connector | Clamp |
| • signal | 30 Vpp (SELV), 0.2 A |
| COM port | Clamp, RS‑232/422/485 |
Video
| Standards | H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG |
|---|---|
| Data rates | 9.6 kbps to 6 Mbps |
| Resolution | Horizontal x vertical PAL/NTSC |
| • 4CIF/D1 | 704 x 576/480 (25/30 ips) |
| • CIF | 352 x 288/240 (25/30 ips) |
| GOP structure | I, IP, IPBB, IBBRBP |
| Overall IP delay | 240 ms max |
| Frame rate | 1 to 50/60 (PAL/NTSC) |
Network
| Ethernet | 10/100 Base‑T, auto-sensing, half/full duplex, RJ45 |
|---|---|
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, noip. com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
| Encryption | TLS 1.0, SSL, DES, 3DES, AES |
Control
| Software update | Flash ROM, remote programmable |
|---|---|
| Configuration | Configuration Manager or web browser |
| Camera control | Via serial interface; supported* protocols and devices: |
| • Bosch | AUTODOME, HSPT, MIC1‑300 IP, TC8x00 |
| • Canon | VCC1, VC-C4R |
| • CBC | SMD 12P/12PII/20P |
| • JVC | TK-C676 |
| • Panasonic | WV-CS850 |
| • Pelco | Spectra D/P |
| • Sensomatic | SpeedDome Ultra |
| • Sony | EVI D30/31/D100 |
| • Ultrak | KD6 |
| • VT | VPT4x |
| * Basic functions only, no claim for full functionality valid. Bosch may not be made responsible if functions are not implemented or not working under all circumstances. | |
| SD card interface | 1 x SD card |
Mechanical
| Dimensions (H x W x D) | 36 x 88 x 118 mm (1.42 x 3.46 x 4.65 in) |
|---|---|
| Weight | Approx. 0.25 kg (0.55 lb) |
Electrical
| Power Supply | Via external unit |
|---|---|
| Input voltage | 12 VDC |
| Current Consumption | 0.30 A max |
| Power Consumption | Approx. 3.6 W |
Environmental
| Operating temperature | 0 °C to +60 °C (+32 °F to +140 °F) ambient temperature |
|---|---|
| Relative humidity | 0 to 95% atmospheric humidity, noncondensing |
| Thermal value | 13 BTU/h max |