sales@protechtors.ae

Bosch VIDEOJET decoder 3000

2
  • HD 1080p30/i60 or 720p60 decoding in single view
  • Quad-view option for SD video up to 960H
  • HDMI or composite video output
  • Bi-directional audio and keyboard support
  • Alarm inputs and relay output

VIDEOJET decoder 3000 displays H.264 encoded video at up to 60 images per second from PAL, NTSC, or HD sources over IP networks.
Establish the video connections automatically from the camera, encoder, decoder, or Bosch’s comprehensive video management system. VIDEOJET decoder 3000 is capable of decoding a single HD video stream, or up to four SD video streams at the same time in quad-mode. Control the viewing mode remotely via a management system. It can drive an HD monitor via HDMI directly, thus is ideally suited for applications like flat-screen monitor walls. Alternatively, it can connect to an analogue monitor using its composite video BNC output.
VIDEOJET decoder 3000 provides one-channel bidirectional audio communication in parallel to video. Ultra-compact in size, VIDEOJET decoder 3000 is perfect for any application that depends on spacesaving solutions.

VIDEOJET decoder 3000

Input/output

Digital video 1 x output
• standard HDM
• video modes PAL, 704 x 576i @ 50 Hz NTSC, 704 x 480i @ 59.97 Hz 960H25, 960 x 576i @ 50 Hz 960H30, 960 x 480i @ 59.97 Hz 720p50, 1280 x 720p @ 50 Hz 720p60, 1280 x 720p @ 60 Hz 1080i50, 1920 x 1080i @ 50 Hz 1080i60, 1920 x 1080i @ 60 Hz 1080p25, 1920 x 1080p @ 25 Hz 1080p30, 1920 x 1080p @ 30 Hz
• connector Type A
• cable length 30 m (98.43 ft) max
Composite video 1 x output
• connector BNC
• impedance 75 ohm
• signal Analog composite, 1 Vpp, NTSC or PAL
• cable length 30 m (98.43 ft) max

Audio

• connector Clamp (non-isolated closing contact)
• activation resistance 10 ohm max

G.711

• Frequency range 300 Hz to 3.4 kHz
• Data rate 80 kbps at 8 kHz sampling rate

L16 (reception only)

• Frequency range 300 Hz to 6.4 kHz
• Data rate 640 kbps at 16 kHz sampling rate
Signal-to-noise ratio > 50 dB

Relay

• connector Clamp
• signal 30 Vpp (SELV), 200 mA
COM port Clamp, RS‑232/422/485, bidirectional

Video

Standards H.264 High Profile, H.264 Main Profile, H.264 Baseline Profile (ISO/IEC 14496‑10) M-JPEG, JPEG
Data rates 9.6 kbps to 10 Mbps per channel
Total delay 300 ms max
Frame rate 1 to 25/30 (PAL/NTSC) 1 to 50/60 (HDMI)

Network

Ethernet 10/100 Base‑T, auto-sensing, half/full duplex, RJ45
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, noip. com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, digest authentication
Encryption TLS 1.0, SSL, DES, 3DES, AES

Control

Software update Flash ROM, remote programmable
Configuration Configuration Manager or Web browser

Electrical

Power supply Via external unit
Input voltage 12 VDC
Input Current 0.75 A
Power consumption Approx. 9 W

Mechanical

Dimensions (H x W x D) 38 x 146 x 183 mm (1.5 x 5.7 x 7.2 in)
Weight Approx. 0.6 kg (1.3 lb)

Environmental

Operating temperature

• Decoder 0 °C to +50 °C (+32 °F to +122 °F) ambient temperature
• Power supply 0 °C to +40 °C (+32 °F to +104 °F) ambient temperature

Relative humidity

• Decoder 0 to 90% atmospheric humidity, noncondensing
• Power supply 20 to 80% atmospheric humidity, noncondensing
Thermal value 31 BTU/h max

User Manual

Datasheet

Got any question or simply need help setting up something?

Head to our support forum

Support Forum

Newsletter Sign up

Lorem ipsum dolor sit amet consectetur adipiscing elit sed tristique.

© Copyright 2024 The Protectors. All rights reserved.

Go to top: