Bosch LTC 0630 Series Dinion2X Day/Night

  • Advanced Image Processing Technology
  • Improved XF-Dynamic engine with SmartBLC
  • Detail enhancement
  • True Day/Night performance with switchable filter
  • 1/2-inch CCD sensor

The LTC 0630 Dinion2X Day/Night camera is a highperformance,surveillance camera. It uses a 1/2-inch CCD sensor and incorporates advanced digital signal processing for outstanding picture performance.The advanced image processing enhances sensitivity;the improved XF-Dynamic engine extends the dynamic range. This unique combination provides a sharper,more detailed image with outstanding accuracy in color reproduction even under harsh lighting conditions.
The Dinion2X camera is easy to install and ready to use, and offers the best solution for demanding scene conditions. The day/night feature ensures the highest image quality possible at any time. Depending on the available light the camera will automatically switch from color to monochrome.
All Dinion cameras are supplied ready to operate.Simply attach the lens, connect video and then power.Six distinct pre-programmed operational modes are stored in the camera. Recall the mode that suits your application for optimized performance.
The camera automatically detects the lens type. The lens wizard ensures accurate back-focusing for perfectly sharp pictures at all times. For especially challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and an On-screen Display (OSD).

LTC 0630 Series Dinion2X Day/Night Camera


Model No./ Rated Voltage /Rated Frequency

LTC 0630/11 24 VAC ±10% 12 VDC ±10% / 50 Hz
LTC 0630/21 24 VAC ±10% z 12 VDC ±10% / 60 H
LTC 0630/51 230 VAC ±10% / 50 Hz
LTC 0630/61 120 VAC ±10% / 60 Hz
Power Consumption 350 mA (12 VDC) 250 mA (24 VAC) 70 mA (120-240 VAC)
CCD Type 1/2-inch interline

Active Pixels

PAL Model 752 x 582
NTSC Model 768 x 494

Sensitivity – (3200K, reflectivity 89%, F1.2)

Full video (100 IRE) /Usable picture(50 IRE) / Usable picture (30 IRE)
Color 1.40 lx (0.13 fc) / 0.31 lx (0.029 fc) / 0.0991 lx (0.0097 fc)
Color + SensUp 10x 0.14 lx (0.013 fc) / 0.031 lx (0.0029 fc) / 0.00991 lx (0.0009 fc)
Monochrome 0.57 lx (0.053 fc) / 0.121 lx (0.0112 fc) / 0.0391 lx (0.0036 fc)
Monochrome SensUp 10x 0.057 lx (0.0053 fc) / 0.0121 lx (0.00112 fc) / 0.00391 lx (0.00036 fc)
Horizontal Resolution 540 TVL
Signal to noise ratio >50 dB
Video Output Composite video 1 Vpp, 75 ohm
Synchronization Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
Shutter Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
Sensitvity Up Adjustable from Off up to 10x
Dynamic Noise Reduction Auto, On/off selectable
White Balance ATW, ATWhold and manual (2500 to 10000K)
Auto Black Automatic continuous, Off
Dynamic Engine XF-Dynamic, SmartBLC
Dynamic Range 96 dB (16-bit image processing)
AGC AGC On or Off (0 – 30 dB) selectable
Smart BLC On/Off
Peak White Invert On/Off
Day/Night Color, Mono, Auto
Video Motion Deduction One area, fully programmable
Privacy Masking Four independent areas, fully programmable
Sharpness Sharpness enhancement level selectable
Alarm input (TTL) Profile switching, +3.3 V nominal, +40 VDC max.
Alarm Output VMD or Bilinx
Alarm Output Relay 30 VAC or +40 VDC, Max 0.5 A continuous, 10 VA
External Synchronization System 75 ohm or high impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
Camera ID 17 character editable string, position selectable
Test Pattern Generator Color bars 100%, Greyscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
Lens Type Manual, DC- and Video-Iris auto-detect with override DC-iris drive: max. 50 mA continuous Video-iris: 11.5 VDC ±0.5, max. 50 mA
Lens Mout CS (max lens protrusion 5 mm, 0.2 inch), C-mount compatible with supplied adapter ring
Modes 6 preset programmable modes
Controls Bilinx coaxial bi-directional communication
Digital Image Stablizer OSD with soft-key operation (multi-lingual)


Dimensions (H x W x L) 58 x 66 x122 mm (2.28 x 2.6 x 4.8 inch) without lens
Weight 450 g (0.99 lbs) without lens
Color RAL 9007 Metallic Titanium
Tripod Mount Bottom (isolated) and top 1/4-inch 20 UNC


Operating Temperature `-20°C to +55°C (-4°F to 131°F)
Storage Temperature `-40°C to +70°C (-40°F to +158°F)
Operating Humidity 20% to 93% RH
Storage Humidity up to 98% RH

User Manual


Got any question or simply need help setting up something?

Head to our support forum

Support Forum

Newsletter Sign up

Lorem ipsum dolor sit amet consectetur adipiscing elit sed tristique.

© Copyright 2024 The Protectors. All rights reserved.

Go to top: