Bosch EXTEGRA IP dynamic 9000 FX

  • High-performance camera with 1080p25/30 HD resolution and HDR in an explosion-proof housing of either anodized aluminum or ruggedized, electropolished 316L stainless steel.
  • All models hold international certifications for use in hazardous environments.
  • Easy one-piece installation with a motorized zoom lens and autofocus mechanism.
  • Optional integrated Ethernet or Fiber Optics provides versatility for longer cable runs or where electromagnetic interference is a concern.
  • ONVIF conformant; provides interoperability with other conformant systems.

The EXTEGRA IP dynamic 9000 FX is a highperformance, smart surveillance, fixed camera system for explosive environments. The professional-grade imaging platform uses the latest technology in intelligent imaging and video streaming and is capable of delivering 1080p25/30 or 720p50/60 HD resolution in environments with extreme ambient challenges. The camera holds all major international explosionprotected certifications for safe use in almost any region of the world. In addition, the camera complies to industry standards such as Type 6P and IP68 ratings. The camera gives you the confidence to ensure a safe workplace while maintaining image quality in the world’s most volatile locations.

EXTEGRA IP dynamic 9000 FX camera

Imager 1/2.8-type Exmor CMOS sensor
Effective Picture Elements (Pixels) 1944 x 1224 (2.38 MP)
Lens 30x Zoom 4.3 mm to 129 mm F1.6 to F4.7
Field of View (FOV) 2.3° to 65°
Automatic with manual override Automatic with manual override
Iris Automatic with manual override
Digital Zoom 12x

Sensitivity / Minimum Illumination (typical)/ 30 IRE/ 50 IRE

Day Mode (Color)

Fixed shutter 1/30, High Sensitivity mode On 0.066 lux/0.209 lux
Fixed shutter 1/30, High Sensitivity mode Off 0.26 lux/0.83 lux
Fixed shutter ¼, High Sensitivity mode On `---/0.026 lux
Fixed shutter ¼, High Sensitivity mode Off `---/0.104 lux
SensUp On, High Sensitivity mode On 0.0103 lux/0.033 lux
SensUp On, High Sensitivity mode Off 0.041 lux/0.104 lux

Night Mode (Black and white)

Fixed shutter 1/30, High Sensitivity mode On 0.033 lux/0.104 lux
Fixed shutter ¼, High Sensitivity mode On 0.0026 lux/---
SensUp On, High Sensitivity mode On 0.00129 lux/0.0041 lux

Additional Camera Settings

Gain Control Auto/Manual/Max
Aperture Correction Horizontal and vertical
Electronic Shutter Speed (AES) 1/1 sec to 1/10000 sec (22 steps)
Dynamic Range 90 dB typical
Signal-to-Noise Ratio >50 dB
Backlight Compensation (BLC) On/Off
White Balance 2000 K to 10,000 K ATW, AWB Hold, Extended ATW, Manual, Sodium Lamp Auto, Sodium Lamp
Day/Night Monochrome, Color, Auto
Defog mode feature Improves visibility when viewing foggy or other low-contrast scenes.


Input Voltage 24 VAC ± 10%, 50/60 Hz or Single Ethernet High PoE cable connection
Power Consumption 18W / 28VA (no heaters) 68W / 85VA (with 24VAC and heaters ON) 48W / 50VA (with High PoE and heaters ON)

Surge Suppression

Protection on Alarm Inputs Peak current 17 A, peak power 300 W (8/20 μs)
Protection on Alarm Outputs Peak current 2 A, peak power 300 W (8/20 μs)
Protection on Relay Output Peak current 7.3 A, peak power 600 W (10/1000 μs)
Protection on Power Input Peak current 7.3 A, peak power 600 W (10/1000 μs)
10/100 Ethernet Data Lines Peak current 14 A, peak power 200 W (8/20 μs)

Communications / Software Control

Camera Setup/Control Via Internet Explorer web browser version 7.0 or later, Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Video Client (BVC), or support for third party software
Software Update Network firmware upload


Standards / Video compression H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming Four (4) individually configurable streams inH.264 and M-JPEG, configurable frame rate and bandwidth:
Two independently configurable H.264 streams Stream 1: H.264 Main Profile (MP): • 91xx models: 720p50/60 • 92xx models: 1080p25/30 Stream 2: H.264 Baseline Profile plus (BP+) or H.264 MP Standard Definition (SD) or Copy of Stream 1
Two additional streams M-JPEG stream and High Definition (HD) I-frame only stream

Resolution (H x V)

1080p HD 1920 x 1080
720p HD 1280 x 720
432p SD 768 x 432
288p SD 512 x 288
144p SD 256 x 144
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (,, noip. com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication
Ethernet 10/100 Base-T, auto-sensing, half/full duplex
Encryption TLS 1.0, SSL, DES, 3DES, AES (optional)
Ethernet connector RJ45 or SFP
Connectivity ONVIF Profile S , Auto-MDIX
GOP Structure IP, IBP, IBBP
Data Rate 9.6 kbps to 6 Mbps
Overall IP Delay 240 ms


Standard G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC, 16 kHz sampling rate
Signal-to-Noise Ratio >50 dB
Audio Streaming Bidirectional (full-duplex)

Local Storage

Memory Card Slot User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC)
Recording Continuous recording of video and audio, alarm/events/schedule recording

Fiber Optic Kit VG4-SFPSCKT

Description Fiber Optic Ethernet Media Converter kit 6. Requires a small form-factor pluggable (SFP) module (sold separately).
Data Interface Ethernet
Ethernet Data Rate 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port Full Duplex Optical Port
Compatible Receiver CNFE2MC

SFP Modules

Description Interchangeable modules available for use with MMF or SMF optical fiber.
Data Interface Ethernet
Data Rate 10/100 Mbps IEEE 802.3 Compliant


Preset Zoom Positions `256
Camera Setup / Control 100 Base Tx Ethernet
Supported Languages English, Czech, Dutch, French, German, Italian, Polish, Portuguese, Russian, Spanish

User Connections

Power, Network 10/100 Base-T, auto-sensing, half/full duplex
Power, Camera 24 VAC (power supply)
Video and Control RJ-45 100 Base-TX Ethernet
Alarm Inputs Three (3) non-supervised Programmable for “normally open” or "normally closed”
Alarm Outputs Two (2) open collector/transistor outputs 32 VDC @ 150 ma max. 1 dry contact relay
Audio 1 x mono line in, 1 x mono line out
Signal line in 12 kOhm typical, 1 Vrms max
Signal line out 1 Vrms at 1.5 kOhm, typical


Ingress Protection Rating `168
UL Type Rating Type 4X, Type 6
Operating Temperature Aluminum models, 24VAC: -50 °C to +60 °C (-58 °F to +140 °F) Aluminum models, PoE: -40 °C to +60 °C (-40 °F to +140 °F) Stainless Steel models, 24VAC: -50 ⁰C to +55 ⁰C (-58 ⁰F to +131 ⁰F) Stainless Steel models, PoE: -40 ⁰C to +55 ⁰C (40 ⁰F to +131 ⁰F)
StorageTemperature -55 °C to +70 °C (-67 °F to +158 °F)
Operating Humidity 0 to 100% relative (condensing, after installed and sealed)
Storage Humidity 20 to 98% relative (non-condensing)


Dimensions (LxWxH) 381 x 114 x 114 mm (11.01 x 4.5 x 4.5 in.) without sunshield or mounting cradle
Weight Stainless Steel: 12.9 kg (28.5 lb) Aluminum: 6.4 kg (14 lb)
Construction Material Electropolished 316L Stainless Steel or Anodized Aluminum
Bracket Pan(±36°)/Tilt(±45°), mounting cradle included
View Window 9-mm thick borosilicate float glass
Cable Entry Four (4) 3/4-in. NPT entries; Thread Adapter (3/4 in. NPT to M20) included


Dimensions (LxWxH)

SFP-2 and SFP-3 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
SFP-25, SFP-26 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
Weight (all SFP modules) 0.23 kg (.05 lb)
Type/Connector/WavelengthT/R/Max. Distance
SFP-2 MMF/Duplex LC/1310 nm/1310 nm 2 km (1.2 miles)
SFP-3 SMF/Duplex LC/1310 nm/1310 nm 20 km (12.4 miles)
SFP-25 MMF/Single SC/1310nm/1550nm 2 km (1.2 miles)
SFP-26 MMF/Single SC/1550 nm/1310 nm 2 km (1.2 miles)

Fiber Compatibility

Optical Fiber Compatibility, MMF 50/125 μm MMF. For 50/125 μm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651.
Optical Fiber Compatibility, SMF 8–10/125 μm SMF. Must meet or exceed fiber standard ITU-T G.652.
Optical Distance Specifications Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.

User Manual


Got any question or simply need help setting up something?

Head to our support forum

Support Forum

© Copyright 2015 The Protectors. All rights reserved.

Go to top: