The AUTODOME 7000 IP is an easy to install, highspeed PTZ dome camera, in a field-proven housing suitable for indoor or outdoor installation, that delivers unmatched picture quality and network performance day and night.
The camera provides complete network-based control of all dome functionality including pan/tilt/zoom operation, presets, tours and alarms as well as webbased configuration of all dome settings. It also provides direct network video streaming using H.264 compression / bandwidth throttling to efficiently manage bandwidth and storage requirements while delivering outstanding image quality.
Bosch AUTODOME 7000 IP 28 X
- Day/night IP camera with 28x or 36x optical zoom (12x digital zoom), Wide Dynamic Range (WDR), and Sodium Vapor White Balance mode that restores objects to their original color
- New Intelligent Tracking and alarm rules engine with on-board Intelligent Video Analytics (IVA)
- Enhanced system flexibility with dual recording options (iSCSI, SD card)
- Fully configurable quad streaming with individually configurable SD streams, based on Bosch’s new Common Product Platform (CPP4)
- Easy and intuitive installation with multiple preconfigured user modes that allow users to select the camera configuration that is ideal for their applications
AUTODOME 7000 IP
Camera 28x Day/Night
| Imager | 1/4 in.-type Exview HAD CCD (progressive scan) |
|---|---|
| Effective Picture Elements (Pixels) | PAL: Approx. 440,000; 752(H) x 582(V) NTSC: Approx. 380,000; 768 (H) x 494 (V) |
| Lens | 28x Zoom (3.5–98.0 mm) F1.35 to F3.7 |
| Field of View (FOV) | 2.1° to 55.8° |
| Minimum Working Distance | 300 mm (wide) to 1500 mm (tele) |
| Focus | Automatic with manual override |
| Iris | Automatic with manual override |
| Optical WIDE / Optical TELE – Focus Tracking ON | 2.5 sec. / 2.5 sec |
| Optical WIDE / Optical TELE – Focus Tracking OFF | 1.7 sec. / 1.7 sec. |
| Optical WIDE / Digital TELE – Focus Tracking ON | 4.5 sec. / 4.9 sec. |
| Optical WIDE / Digital TELE – Focus Tracking OFF | 1.7 sec. / 1.7 sec. |
| Digital WIDE / Digital TELE | 2.0 sec. / 2.5 sec. |
Sensitivity / Minimum Illumination (typical)/30 IRE /50 IRE
Day Mode (Color)
| SensUp Off | 0.33 lux (0.031 fc)/ 0.66 lux (0.061 fc) |
|---|---|
| SensUp On (NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) | 0.02 lux (0.002 fc) / 0.04 lux (0.004 fc) |
Night Mode (Black and white)
| SensUp Off | 0.066 lux (0.006 fc) / 0.166 lux (0.015 fc) |
|---|---|
| SensUp On (NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) | 0.0026 lux (0.0002 fc) / 0.0082 lux (0.0008 fc) |
Additional Camera Settings
| Gain Control | Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps) |
|---|---|
| Digital Zoom | 12x |
| Synchronization | Line-Lock (–120° to 120° vertical phase adjust) or internal crystal |
| Aperture Correction | Horizontal and Vertical |
| Electronic Shutter Speed (AES) | NTSC: 1/4 to 1/10,000 sec., 20 steps PAL: 1/3 to 1/10,000 sec., 20 steps |
| Dynamic Range | 92 dB (50 dB with WDR Off) |
| Signal-to-Noise Ratio | >50 dB (Weighting ON) |
| Backlight Compensation (BLC) | On/Off |
| White Balance | ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual, Outdoor Auto, Sodium Lamp Auto, Sodium Lamp |
| Day/Night | Monochrome, Color, Auto |
| Stabilization | On/Off |
Mechanical
| In-Ceiling/Pendant | |
| Pan Range | 360° cont. / 360° cont. |
| Tilt Angle | 1° above horizon / 18° above horizon |
| Pre-position Speed | Pan: 400°/s Tilt: 300°/s /Pan: 400°/s Tilt: 300°/s |
Pan/Tilt Modes
| Turbo Mode(Manual Control) | Pan: 0.1°/s – 400°/s Tilt: 0.1°/s – 300°/s |
|---|---|
| Normal Mode | 0.1°/s-120°/s / 0.1°/s-120°/s |
| Preset Accuracy | ± 0.1° typ. / ± 0.1° typ. |
Mechanical
| In-Ceiling/ Pendant | |
| Input Voltage | 21-30 VAC , 50/60 Hz High PoE or PoE+ (IEEE 802.3at, class 4 standard)/ 21-30 VAC, 50/60 Hz or High PoE |
| Power Consumption | 24 W / 44 VA / 60 W / 69 VA (heaters on) or 24 W / 44 VA3 (heaters off) |
Surge Suppression
| Protection on Alarm Inputs | Peak current 17 A, peak power 300 W (8/20 μs) |
|---|---|
| Protection on Alarm Outputs | Peak current 2 A, peak power 300 W (8/20 μs) |
| Protection on Relay Output | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on Power Input (Dome) | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on Power Output (Arm Power Supply) | Peak current 21.4 A, peak power 1500 W (10/1000 μs) |
| 10/100 Ethernet Data Lines | Peak current 14 A, peak power 200 W (8/20 μs) |
Communications / Software Control
| Camera Setup/Control | Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), or Bosch Video Client (BVC) |
|---|---|
| Software Update | Network firmware upload |
Network
| Standards / Video compression | H.264 (ISO/IEC 14496‑10), M‑JPEG |
|---|---|
| Encoding / Streaming | |
| H.264 /MJPEG | |
| Scenario | |
| Stream 1/Stream 2 /Stream 3/Stream 4 | |
| 1 | 4CIF@30ips / 4CIF@30ips / I-frame only from Stream 1 / 4CIF@30ips |
| 2 | 4CIF@30ips / Copy of Stream 1 / I-frame only from Stream 1 / 4CIF@30ips |
| 3 | Downscaled stream / Downscaled stream /I-frame only from Stream 1/ Downscaledstream from Stream 1 |
Resolution (H x V)
| HD Resolutions | |
| 4CIF/D1 | 704 x 576/480 (25/30 ips, or 50/60 fields/s for interlaced fields) |
| CIF | 352 x 288/240 (25/30 ips, or 50/60 fields/s for interlaced fields) |
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
| Advanced Networking | IPv6, QoS |
| Ethernet | 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45 |
| GOP Structure | IP, IBP, IBBP |
| Data Rate | 9.6 kbps to10 Mbps (per stream) |
| Overall IP Delay | 240 ms |
| Audio | 1 x mono line in, 1 x mono line out |
| Standard | G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC, 16 kHz sampling rate |
| Signal-to-Noise Ratio | >50 dB |
| Audio Streaming | Bidirectional (full duplex) |
| Signal line in | 12 kOhm typical, 1 Vrms max |
| Signal line out | 1 Vrms at 1.5 kOhm, typical |
Local Storage
| Memory Card Slot | User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC) |
|---|---|
| Recording | Continuous recording of video and audio |
Fiber Optic Kit VG4-SFPSCKT
| Description | Fiber Optic Ethernet Media Converter kit5. Requires a small form-factor pluggable (SFP) module (sold separately). |
|---|---|
| Data Interface | Ethernet |
| Data Rate | 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port Full Duplex Optical Port |
| Compatible Receiver | CNFE2MC |
| Installation | Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware |
SFP Modules
| Description | Interchangeable modules available for use with MMF or SMF optical fiber. |
|---|---|
| Data Interface | Ethernet |
| Data Rate | 10/100 Mbps IEEE 802.3 Compliant |
Miscellaneous
| Sectors / Titling | 16 independent sectors with a 20-character title/sector |
|---|---|
| Privacy Masking | 24 individually configurable privacy masks |
Virtual Masking
| Pre-positions | 256, each with a 20-character title |
|---|---|
| Guard Tours | Two (2) types of tours: • Recorded tours – two (2) • Preset tour – one (1), consisting of up to 256 scenes, consecutively |
| Supported Languages | English, Chinese, Dutch, French, German, Italian, Japanese, Polish, Portuguese, and Spanish |
User Connections
| Power, Camera | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) or PoE+ (IEEE 802.3at, class 4 standard) 21-30 VAC, 50/60 Hz |
|---|---|
| Power, Heater | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) 21-30 VAC, 50/60 Hz |
| Video and Control | RJ-45 10/100 Base-TX Ethernet |
| Alarm Outputs (7) | 2 supervised; 5 non-supervised Programmable for “normally open” or "normally closed" |
| Alarm Outputs (4) | 1 dry contact relay; 3 open collector/ transistor outputs 32 VDC @ 150 ma max. |
Environmental/In-Ceiling (with acrylic bubble)/Pendant (with acrylic bubble)
| IP54, Plenum rated/ IP667 | |
| Ingress Protection Rating/ Standard | NEMA 4X for: • Access to Hazardous parts • Ingress of solid foreign objects (falling dirt, circulating dust, settling dust) • Ingress of water (dripping and light splashing, hosedown and splashing) • Corrosive agents |
| Operating Temperature | `-10°C to 40°C (14°F to 104°F)/-40°C to 55°C (-40°F to 131°F)or -10°C to 55°C 14°F to 131°F)6 |
| Storage Temperature | `-40°C to 60°C (-40°F to 140°F)/ / -40°C to 60°C (-40°F to 140°F) |
| Humidity | 0% to 90% relative, noncondensing / 0% to 100% relative, condensing |
Construction
Dimensions/See dimensional drawings
| Weight / In-ceiling | 2.58 kg (5.69 lb) |
|---|---|
| Indoor/Outdoor Pendant | 3.06 kg (6.75 lb) |
| Bubble Size | 153.1 mm diameter (6.03 in.) |
Construction Material
| Housing | In-ceiling: Magnesium Pendant: Cast aluminum |
|---|---|
| Bubble | In-ceiling: High-resolution acrylic, rugged polycarbonate, or HD high-resolution acrylic Pendant: High-resolution acrylic or rugged polycarbonate |
| Standard Color | White (RAL 9003) |
| Standard Finish | Powder coated, sand finish |
Mounts/Accessories
Bubbles/In-ceiling
| Clear HD high-resolution acrylic | VGA-BUBHD-CCLA |
|---|---|
| Tinted HD high-resolution acrylic (Included with in-ceiling camera models.) | VGA-BUBHD-CTIA |
Pendant
| Clear high-resolution acrylic (Included with pendant camera models.) | VGA-BUBBLE-PCLA |
|---|---|
| Tinted high-resolution acrylic | VGA-BUBBLE-PTIA |
Pendant Arm Mounts
| Wall Arm (No Transformer) | VG4-A-PA0 |
|---|---|
| Wall Arm (120/230 VAC Transformer) | VG4-A-PA1 / VG4-A-PA2 |
| Pendant Arm with Wiring | VGA-PEND-ARM |
| Mounting plate for VGA-PEND-ARM | VGA-PEND-WPLATE |
| Trim skirt for VG4 Series Power Supplies | VG4-A-TSKIRT |
Optional Mounting Plates for Arm Mounts
| Corner Mounting Plate | VG4-A-9542 |
|---|---|
| Mast (Pole) Mounting Plate | VG4-A-9541 |
Pendant Pipe Mounts
| Pipe Mount Cap | VG4-A-9543 |
|---|
Pendant Roof Mounts
| Roof (Parapet) Mount | VGA-ROOF-MOUNT |
|---|
Optional Mounting Plates for Roof Mounts
| Flat Roof Adapter for Parapet Mount | LTC 9230/01 |
|---|
In-ceiling Support Kits
| Bracket for suspended or drop ceilings | VGA-IC-SP |
|---|
Power Supplies
| High PoE Midspan 60W, single port, AC in | NPD-6001A |
|---|---|
| Outdoor Power Supply Box, no transformer | VG4-A-PSU0 |
| Outdoor Power Supply Box (120/230 VAC Transformer) | VG4-A-PSU1 / VG4-A-PSU2 |
| Fiber Optic Kit | VG4-SFPSCKT |
Dimensions (LxWxH)
| SFP-2 and SFP-3 | 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) |
|---|---|
| SFP-25, SFP-26 | 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) |
| Weight (all SFP modules) | 0.23 kg (.05 lb) |
| Type /Connector/ Wavelength(T/R)/Max. Distance | |
| SFP-2 | MMF / Duplex LC / 1310 nm /1310 nm / 2 km (1.2 miles) |
| SFP-3 | SMF / Duplex LC / 1310 nm / 1310 nm / 20 km (12.4 miles) |
| SFP-25 | MMF / Single SC / 1310 nm / 1550 nm / 2 km (1.2 miles) |
| SFP-26 | MMF / Single SC / 1550 nm / 1310 nm / 2 km (1.2 miles) |
Fiber Compatibility
| Optical Fiber Compatibility, MMF | 50/125 μm MMF. For 50/125 μm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651. |
|---|---|
| Optical Fiber Compatibility, SMF | 8–10/125 μm SMF. Must meet or exceed fiber standard ITU-T G.652. |
| Optical Distance Specifications | Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate. |