The AUTODOME 7000 HD is an easy to install, highspeed PTZ dome camera, in a field-proven indoor/ outdoor pendant housing or indoor in-ceiling housing, that delivers unmatched picture quality and network performance day and night with superb high-definition (HD) 1080p25/30 (2MP) video and 20x optical zoom. The camera provides complete network-based control of all dome functionality including pan/tilt/zoom operation, presets, tours and alarms as well as webbased configuration of all dome settings. It also provides direct network video streaming using H.264 compression / bandwidth throttling to efficiently manage bandwidth and storage requirements while delivering outstanding image quality.
Bosch AUTODOME 7000 HD
- High-resolution, full HD PTZ camera with 1080p25/30 (2MP) resolution and 20x zoom for capturing fine details
- New Intelligent Tracking and alarm rules engine with on-board Intelligent Video Analytics (IVA)
- Enhanced system flexibility with dual recording options (iSCSI, SD card) and dual power source options (High Power over Ethernet (High PoE) / 24 VAC)
- Fully configurable quad streaming with individually configurable HD streams, based on Bosch’s new Common Product Platform (CPP4)
- Easy and intuitive installation with multiple preconfigured user modes that allow users to select the camera configuration that is ideal for their applications
AUTODOME 7000 HD
20x HD Day/Night Camera
| Imager | 1/2.8-in.-type CMOS |
|---|---|
| Effective Picture Elements (Pixels) | Effective: Approximately 3.27 megapixels Delivered: Approximately 2 megapixels |
| Aspect Ratio | HD: 16:9 |
| Lens | 20x optical zoom,(4.7 to 94 mm) |
| 1080p Mode | 2.9° (tele) to 55.4° (wide) |
| 720p Mode | 2.0 (tele) to 37.6 (wide) |
| Minimum Working Distance | Day mode: 300 mm (wide) to 1000 mm (tele) Night mode: 10 mm (wide) to 1000 mm (tele) |
| Focus | One-push (default), Automatic (normal, low), Manual |
| Iris | Automatic with manual override (F1.6 to F3.5) |
Sensitivity / Minimum Illumination (typical)/30 IRE /50 IRE
Day Mode (Color)
| SensUP Off (1/30 [1/25] shutter); High Sensitivity Off | 0.8 lux (0.074 fc) / 1.7 lux (0.158 fc) |
|---|---|
| SensUP On, max. (0.25 sec. shutter); High Sensitivity On3 | 0.04 lux (0.004 fc)/0.08 lux (0.007 fc) |
Night Mode
| SensUP Off (1/30 [1/25] shutter); High Sensitivity Off | 0.12 lux (0.011 fc)/0.3 lux (0.028 fc) |
|---|---|
| SensUP On, max. (0.25 sec. shutter); High Sensitivity On3 | 0.005 lux (0.0005 fc)/0.011 lux (0.001 fc) |
| Gain Control | Automatic/Manual (–3 to +28 dB, +2 dB steps/16 steps) |
| Digital Zoom | 12x |
| Electronic Shutter Speed (AES) | 1/1 to 1/10000 s, 22 steps |
| Dynamic Range | 86 dB (WDR on) |
| Signal-to-Noise Ratio | > 50 dB (AGC off, Weighting ON) |
| Backlight Compensation (BLC) | On/Off |
| White Balance | ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual, Outdoor Auto, Sodium Lamp Auto, Sodium Lamp |
| Day/Night | Monochrome, Color, Auto |
Mechanical
| In-Ceiling/Pendant | |
| Pan Range | 360° cont./360° cont. |
| Tilt Angle | 1° above horizon/ 18° above horizon |
| Pre-position Speed | Pan: 400°/s Tilt: 300°/s /Pan: 400°/s Tilt: 300°/s |
Pan/Tilt Modes
| Turbo Mode(Manual Control) | Pan: 0.1°/s – 400°/s Tilt: 0.1°/s – 300°/s |
|---|---|
| Normal Mode | 0.1°/s-120°/s / 0.1°/s-120°/s |
| Preset Accuracy | ± 0.1° typ./± 0.1° typ. |
Electrical
| In-Ceiling/Pendant | |
| Input Voltage | 21-30 VAC, 50/60 Hz (class II); High PoE (with Bosch NPD-6001A Midspan)/21-30 VAC, 50/60 Hz; (class II)High PoE (with Bosch NPD-6001A Midspan); or [PoE+ (IEEE 802.3at, class 4 standard)] or PoE+ (IEEE 802.3at, class 4standard) |
| Power Consumption | 24 W / 44 VA / 60 W / 69 VA (heaters on)or24 W / 44 VA (heaters off) 5 |
Surge Suppression
| Protection on Alarm Inputs | Peak current 17 A, peak power 300 W (8/20 μs) |
|---|---|
| Protection on Alarm Outputs | Peak current 2 A, peak power 300 W (8/20 μs) |
| Protection on Relay Output | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on Power Input (Dome) | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on Power Output (Arm Power Supply) | Peak current 21.4 A, peak power 1500 W (10/1000 μs) |
| 10/100 Ethernet Data Lines | Peak current 14 A, peak power 200 W (8/20 μs) |
Communications / Software Control
| Camera Setup/Control | Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), or Bosch Video Client (BVC) |
|---|---|
| Software Update | Network firmware upload |
Network
| Standards / Video compression | H.264 (ISO/IEC 14496‑10), M‑JPEG |
|---|---|
| Encoding / Streaming | |
| H.264 /MJPEG | |
| Scenario | |
| Stream 1/Stream 2/Stream 3/Stream 4 | |
| 1 | Full HD 1080p30/Full HD 1080p5/I-frame only from Stream 1/1080p |
| 2 | Full HD 1080p30/HD 720p10/I-frame only fromStream 1/1080p |
| 3 | Full HD 1080p30/Downscaled stream/I-frame only from Stream 1/1080p |
| 4 | Full HD 1080p30/Copy of Stream 1/I-frame only from Stream 1/1080p |
| 5 | HD 720p60/HD 720p8/I-frame only from Stream 1/720p |
| 6 | HD 720p30/HD 720p30/I-frame only from Stream 1/720p |
| 7 | HD 720p30/Downscaled stream/I-frame only from Stream 1/720p |
| 8 | Downscaled stream/Downscaled stream/I-frame only from Stream 1/1080p |
Resolution (H x V)
| HD Resolutions | |
| 1080p HD | 1920 x 1080 |
| 720p HD | 1280 x 720 |
| Down-scaled SD streams | |
| 432p SD | 768 x 432 |
| 288p SD | 512 x 288 |
| 144p SD | 256 x 144 |
| Corridor mode | 400 x 720 |
| D1 4:3 cropped | 704 x 480 |
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
| Advanced Networking | IPv6, QoS |
| Ethernet | 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45 |
| GOP Structure | IP, IBP, IBBP |
| Data Rate | 9.6 kbps to 10 Mbps (per stream) |
| Overall IP Delay | 240 ms |
Audio
| Standard | G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC, 16 kHz sampling rate |
|---|---|
| Signal-to-Noise Ratio | >50 dB |
| Audio Streaming | Bidirectional (full-duplex) |
| Signal line in | 12 kOhm typical, 1 Vrms max |
| Signal line out | 1 Vrms at 1.5 kOhm, typical |
| Audio | 1 x mono line in, 1 x mono line out |
Local Storage
| Memory Card Slot | User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC) |
|---|---|
| Recording | Continuous recording of video and audio |
Fiber Optic Kit VG4-SFPSCKT
| Description | Fiber Optic Ethernet Media Converter kit 6. Requires a small form-factor pluggable (SFP) module (sold separately). |
|---|---|
| Data Interface | Ethernet |
| Data Rate | 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port Full Duplex Optical Port |
| Compatible Receiver | CNFE2MC |
| Installation | Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware |
SFP Modules
| Description | Interchangeable modules available for use with MMF or SMF optical fiber. |
|---|---|
| Data Interface | Ethernet |
| Data Rate | 10/100 Mbps IEEE 802.3 Compliant |
Miscellaneous
| Sectors / Titling | 16 independent sectors with a 20-character title/sector |
|---|---|
| Privacy Masking | 24 individually configurable privacy masks |
| Pre-positions | 256, each with a 20-character title |
| Guard Tours | Two (2) types of tours: • Recorded tours – two (2) • Preset tour – one (1), consisting of up to 256 scenes, consecutively |
| Supported Languages | English, Chinese, Dutch, French, German, Italian, Japanese, Polish, Portuguese, and Spanish |
User Connections
| Power, Camera | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) or PoE+ (IEEE 802.3at, class 4 standard) 21-30 VAC, 50/60 Hz |
|---|---|
| Power, Heater | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) 21-30 VAC, 50/60 Hz |
| Video and Control | RJ-45 10/100 Base-TX Ethernet |
| Alarm Outputs (7) | 2 supervised; 5 non-supervised Programmable for “normally open” or "normally closed" |
| Alarm Outputs (4) | 1 dry contact relay; 3 open collector/ transistor outputs 32 VDC @ 150 ma max. |
Environmental/In-Ceiling (with acrylic bubble)/Pendant (with acrylic bubble)
| Ingress Protection Rating/ Standard | IP54, Plenum rated IP66,,/NEMA 4X 7 NEMA 4X for: • Access to Hazardous parts • Ingress of solid foreign objects (falling dirt, circulating dust, settling dust) • Ingress of water (dripping and light splashing, hosedown and splashing) • Corrosive agents |
|---|---|
| Operating Temperature | `-10 °C to 40 °C(14 °F to 104 °F) / -40 °C to 55 °C (-40 °F to 131 °F)or -10 °C to 55 °C (14 °F to 131 °F) 8 |
| Storage Temperature | `-40 °C to 60 °C (-40 °F to 140 °F)/-40 °C to 60 °C (-40 °F to 140°F) |
| Humidity | 0% to 90% relative, noncondensing/0% to 100% relative, condensing |
Construction
| Dimensions | See dimensional drawings |
|---|---|
| Weight/In-ceiling | 2.58 kg (5.69 lb) |
| Indoor/Outdoor Pendant | 3.06 kg (6.75 lb) |
| Bubble Size | 153.1 mm diameter (6.03 in.) |
Construction Material
| Housing | In-ceiling: Magnesium Pendant: Cast aluminum |
|---|---|
| Bubble | In-ceiling: HD High-resolution acrylic Pendant: High-resolution acrylic |
| Standard Color | White (RAL 9003) |
| Standard Finish | Powder coated, sand finish |
Mounts/Accessories
Bubbles/In-ceiling
| Clear HD high-resolution acrylic | VGA-BUBHD-CCLA |
|---|---|
| Tinted HD high-resolution acrylic (Included with in-ceiling camera models.) | VGA-BUBHD-CTIA |
Pendant
| Clear high-resolution acrylic (Included with pendant camera models.) | VGA-BUBBLE-PCLA |
|---|---|
| Tinted high-resolution acrylic | VGA-BUBBLE-PTIA |
Pendant Arm Mounts
| Wall Arm (No Transformer) | VG4-A-PA0 |
|---|---|
| Wall Arm (120/230 VAC Transformer) | VG4-A-PA1 / VG4-A-PA2 |
| Pendant Arm with Wiring | VGA-PEND-ARM |
| Mounting plate for VGA-PEND-ARM | VGA-PEND-WPLATE |
| Trim skirt for VG4 Series Power Supplies | VG4-A-TSKIRT |
Optional Mounting Plates for Arm Mounts
| Corner Mounting Plate | VG4-A-9542 |
|---|---|
| Mast (Pole) Mounting Plate | VG4-A-9541 |
Pendant Pipe Mounts
| Pipe Mount Cap | VG4-A-9543 |
|---|
Pendant Roof Mounts
| Roof (Parapet) Mount | VGA-ROOF-MOUNT |
|---|
Optional Mounting Plates for Roof Mounts
| Flat Roof Adapter for Parapet Mount | LTC 9230/01 |
|---|
In-ceiling Support Kits
| Bracket for suspended or drop ceilings | VGA-IC-SP |
|---|
Power Supplies
| High PoE Midspan 60W, single port, AC in | NPD-6001A |
|---|---|
| Outdoor Power Supply Box, no transformer | VG4-A-PSU0 |
| Outdoor Power Supply Box (120/230 VAC Transformer) | VG4-A-PSU1 / VG4-A-PSU2 |
| Fiber Optic Kit | VG4-SFPSCKT |
Dimensions (LxWxH)
| SFP-2 and SFP-3 | 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) |
|---|---|
| SFP-25, SFP-26 | 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) |
| Weight (all SFP modules) | 0.23 kg (.05 lb) |
| Type/Connector/ Wavelength(T/R)/Max. Distance | |
| SFP-2 | MMF/Duplex LC/1310 nm / 1310 nm/2 km (1.2 miles) |
| SFP-3 | SMF/Duplex LC/1310 nm /1310 nm/20 km (12.4 miles) |
| SFP-25 | MMF/Single SC/1310 nm / 1550 nm/2 km (1.2 miles) |
| SFP-26 | MMF/Single SC/1550 nm/1310 nm/2 km (1.2 miles) |
Fiber Compatibility
| Optical Fiber Compatibility, MMF | 50/125 μm MMF. For 50/125 μm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651. |
|---|---|
| Optical Fiber Compatibility, SMF | 8–10/125 μm SMF. Must meet or exceed fiber standard ITU-T G.652. |
| Optical Distance Specifications | Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate. |