Call Us: +92 51 11 11 BOSCH / Email: sales@theprotechtors.com

Bosch VIDEOJET XTC XF Video Transcoder

2
  • Dynamic Transcoding for live view and advanced remote replay
  • Enables HD video over bandwidth-limited links
  • Bandwidth-friendly Adaptive Bit Rate (ABR) encoding
  • Instant Display Enhancement during pause mode
  • Local recording on CF card for up to four HD cameras

VIDEOJET XTC XF enables HD video up to 1080p30 or 720p60 to be seen over wide area networks or through mobile access in original quality. Its Dynamic Transcoding functionality makes it the ideal entrance door for central monitoring systems to remote HD camera sites, or for remote clients to small business HD video surveillance installations.Even megapixel cameras can be connected if they provide a video stream with a resolution downscaled to HD.
Its transcoding services seamlessly integrate with VRM Video Recording Manager installations, enabling for example mobile access for on-site guards to HD video, both live and playback.
VIDEOJET XTC XF provides two independent transcoded streams, enabling live viewing access to two HD cameras or playback of their recordings simultaneously, regardless of the network bandwidth. The Bosch Video Security app for iOS devices like Apple iPad provides an advanced but intuitive tool to fully utilize the VIDEOJET XTC XF transcoder’s features.
The Bosch Video Security app as well as the Web browser playback interface allow forensic search in the recordings of IVA-enabled HD cameras, providing quick results for highly efficient digging into relevant situations. Having found an event or a point of interest, pausing the replay causes the Instant Display Enhancement feature to present the HD image in its original recording quality. VIDEOJET XTC XF is built into a housing that can be easily rack- or wall-mounted. These powerful and flexible devices represent the cutting edge of high-performance Video-over-IP for HD CCTV today.

VIDEOJET XTC XF Video Transcoder

Input/output

• connector Clamp (non-isolated closing contact)
• activation resistance 10 ohm max
Relay 1 x output
• connector Clamp
• signal 30 Vpp (SELV), 200 mA
COM port Clamp, RS‑232/422/485, bidirectional

Video

Standards H.264 Main Profile, H.264 Baseline Profile (ISO/IEC 14496‑10) M-JPEG, JPEG
Transcoding channels `2
Resolution 1080p30 max 720p60 max
Data rates 9.6 kbps to 10 Mbps per channel
Total delay 120 ms max
Frame rate 1 to 25/30 (PAL/NTSC)

Network

Ethernet 10/100 Base‑T, auto-sensing, half/full duplex, RJ45
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, noip. com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication
Encryption TLS 1.0, SSL, DES, 3DES, AES

Control

Software update Flash ROM, remote programmable
Configuration Configuration Manager or Web browser

Storage medium

CompactFlash 1 x CF slot for optional standard Type I/II CompactFlash memory card, 2 TB max

Electrical

Power supply Via external unit
Input voltage 12 VDC
Current consumption 0.75 A
Power consumption Approx. 9 W

Mechanical

Dimensions (H x W x D) 38 x 146 x 178 mm (1.5 x 5.7 x 7.0 in)
Weight Approx. 0.6 kg (1.3 lb)

Environmental

Operating temperature

• Transcoder 0 °C to +50 °C (+32 °F to +122 °F) ambient temperature
• Power supply 0 °C to +40 °C (+32 °F to +104 °F) ambient temperature

Relative humidity

• Transcoder 0 to 90% atmospheric humidity, noncondensing
• Power supply 20 to 80% atmospheric humidity, noncondensing
Thermal value 31 BTU/h max

User Manual

Datasheet

Got any question or simply need help setting up something?

Head to our support forum

Support Forum

© Copyright 2015 The Protectors. All rights reserved.

Go to top: