Call Us: +92 51 11 11 BOSCH / Email: sales@theprotechtors.com

Bosch High‑Speed Positioning System

2
  • Pans up to 100º per second, 360º continuous rotation
  • Tilts up to 40º per second, -90º to +40º range
  • Choice of DinionXF Color or Dinion 2X Day/Night cameras and motorized zoom lens combinations
  • IP 66 rated, tough, attractive casing with up to 20 kg balanced load
  • Optional Bosch AEGIS UFLED Infrared Illuminator assembly attaches directly to the High-Speed Positioning System for operation in dark environments

The Bosch High-Speed Positioning System (HSPS) is a complete solution that is high on quality and performance. It can pan 360° continuously at speeds of up to 100° per second. An extensive range of options lets you tailor the system to your specific requirements. For example, the HSPS offers a variety of DinionXF and Dinion 2X cameras and lens combinations, and the system can be ordered with two Bosch AEGIS UFLED Infrared Illuminators for operation in dark environments.
Autopan and patrol functions are accurate to within 0.02°, with text labels assigned to presets for added convenience. Automatic lens scaling, which keeps zoom and speed synchronized, ensures smooth video pictures throughout pan and tilt movement.
A completely self-contained unit, the High-Speed Positioning System is easy to install and maintain.Multi-protocol capabilities, including Bilinx and Biphase, also simplify connections. The tough,protective casing can support a 20 kg balanced load and is IP66-rated – ideal for weathering the outdoor conditions common in traffic and industrial applications. All units have a sunshield and an integrated wiper. The wiper is available with an optional washer.

High‑Speed Positioning System

Electrical

Input Voltage 24 VAC
Standard System 24 VAC

Power Draw (max.)

Standard System `5 A
IR 360 System `8 A
Input Frequency 50/60 Hz
Integrated Housing Input Thermostat heater, 24 VAC, 20 W max.
Camera Input 12 VDC, 800 mA
Lens Input +6 to +15 VDC, 200 mA
Wiper (optional) Input 24 VAC, 400 mA
Illuminator (optional) Input 24 VAC, 2 A + 2 A max.
Tour Control Autopan; Preset; Patrol
Presets 250 selectable (max. 99 via keyboard)
Preset / Area Names 20-character string
Preset Accuracy 0.02º
Data Set-up Flash memory
Serial RS-232, Sub-D for firmware upgrade
Protocols Bilinx, Biphase, Pelco-D, and third party protocols on RS-485
Supported Platforms DiBos, Divar, Allegiant
Max. Addressable Units Bilinx/Biphase: 998 (dipswitch setting) Pelco-D: 255 (dipswitch setting)
Firmware Upgrades RS-232 interface
Configuration Modes Via PC or OSD
Configuration Interface RS-485

Mechanical

Dimensions (H x W x D) 584 x 258 x 514 mm (23.0 x 10.2 x 20.2 in.)
Weight Approx. 14 kg (31 lb)
Mounting Top mount (OTT)
Color Light grey (RAL 7035)
Material Die cast and extruded aluminum, ABS

Rotation

Horizontal –90º to +40º
Vertical 360º continuous

Speed/Manual/Patrol / Autopan

Horizontal (pan)

Standard System 0.1º to 100º/s / 0.1º to 100º/s
IR 360 System 0.1º to 40º/s / 0.1º to 40º/s

Vertical (tilt)

Standard System 0.1º to 40º/s / 0.1º to 30º/s
IR 360 System 0.1º to 30º/s / 0.1º to 30º/s

Static / Dynamic Torque

Horizontal 20 Nm
Vertical 20 Nm
Transmission Toothed belt

Environmental

Operating Temperature –20 ºC to +50 ºC (–4 ºF to +122 ºF)
Storage Temperature –20 ºC to +60 ºC (–4 ºF to +140 ºF)
Humidity <90% relative humidity (non-condensing)
Enclosure Protection IP 66

UPH-C485 Series

Camera Model LTC 0485 DinionXF Color, 1/3-inch Digital CCD Camera

Active Pixels

NTSC 768 H x 492 V
PAL 752 H x 582 V

Sensitivity (3200 k)

Sensitivity (full video)4 2.4 lux (0.24 fc)
Sensitivity 50 IRE4 0.59 lux / 0.24 lux (NightSense) (0.059 fc / 0.024 fc (NightSense))
Minimum Illumination4 0.24 lux / 0.10 lux (NightSense) (0.024 fc / 0.01 fc (NightSense))
Minimum Illumination with SensUp 0.024 lux / 0.010 lux (NightSense) (0.0024 fc / 0.0010 fc (NightSense))
Horizontal Resolution 540 TVL
Signal-to-Noise-Ratio > 50 dB
Video Output 1 Vpp, 75 Ohm
Y/C Output Y: 1 Vpp / C: 0.3 Vpp
Synchronization Internal, Line Lock, HV-lock and genlock (Burst lock) selectable
Electronic Shutter Auto (1/60 [1/50] to 1/500000), fixed, flickerless, default
SensUp Off, automatic continuous up to 10x
Auto Black On, off selectable
Range 32x dynamic range enhancement
Dynamic Noise Reduction Auto, off selectable
Contour Sharpness enhancement level selectable
BLC Off, area and level selectable
Gain Auto (maximum level selectable to 28 dB) or fixed level selectable
VMD Four (4) area, sensitivity selectable
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay Max. 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA
External Synchronal Input 75 Ohm or High Impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with coaxial communication)
Camera ID 16-character editable string, position selectable
Remote Control Bi-directional coaxial communication

UPH-C498 Series

Camera Model LTC 0498 Dinion 2X Day/Night, 1/3-inch Digital CCD Camera

Active Pixels

NTSC 768 H x 494 V
PAL 752 H x 582 V

Sensitivity (3200 K, scene reflectivity 89%, F1.2)

Full video (100 IRE)/Usable picture(50 IRE)/ Usable picture (30 IRE)
Color 2.4 lx (0.24 fc) / 0.59 lx (0.059 fc) / 0.24 lx (0.024 fc)
Color + SensUp 10x 0.24 lx (0.024 fc) / 0.059 lx (0.0059 fc) / 0.024 lx (0.0024 fc)
Monochrome - / 0.08 lx (0.008 fc) / 0.038 lx (0.0038 fc)
Monochrome + SensUp 10x - / 0.008 lx (0.0008 fc) / 0.0038 lx (0.00038 fc)
Horizontal Resolution 540 TVL
Signal-to-Noise Ratio >50 dB
Video Output Composite video 1 Vpp, 75 ohm
Synchronization Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
Shutter Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
SensUp Adjustable from Off up to 10x
Day/Night Color, Mono, Auto
Auto Black Automatic continuous, Off
Dynamic Engine XF-Dynamic, 2X-Dynamic, SmartBLC
Dynamic Range 120 dB (20-bit image processing)
Dynamic Noise Reduction Auto, On/off selectable
Sharpness Sharpness enhancement level selectable
SmartBLC On/Off
AGC AGC On/Off (0 dB) selectable
Peak White Invert On/Off
White Balance ATW, ATWhold and manual (2500–10000 K)
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +3.3 V nominal, +40 VDC max.
Alarm Output Relay 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA
External Synchronization Input 75 Ohm or High Impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial
communication)
Camera ID 17-character editable string, position selectable
Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
Modes Six (6) preset programmable modes
Remote Control Bilinx coaxial bi-directional communication
Video Motion Detection One area, fully programmable
Controls OSD with soft-key operation (multi-lingual)

UPH-C610 Series

Camera Model LTC 0610 DinionXF Color, 1/2-inch Digital CCD Camera

Active Pixels

NTSC 768 H x 492 V
PAL 752 H x 582 V

Sensitivity (3200 k)

Sensitivity (full video)5 1.4 lx (0.14 fc)
Sensitivity 50 IRE5 0.35 lux / 0.14 lux (NightSense) (0.035 fc / 0.014 fc (NightSense))
Minimum Illumination5 0.18 lux / 0.08 lux (NightSense) (0.018 fc / 0.008 fc (NightSense))
Minimum Illumination with SensUp 0.018 lux / 0.008 lux (NightSense) (0.0018 fc / 0.0008 fc (NightSense))
Horizontal Resolution 540 TVL
Signal-to-Noise- Ratio > 50dB
Video Output 1Vpp, 75 Ohm
Y/C Output Y: 1 Vpp / C: 0.3 Vpp
Synchronization Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
Shutter Auto (1/60 [1/50] to 1/500000), fixed, flickerless, default
Night Sense Auto, Forced, Off
SensUp Off, automatic continuous up to 10x
Auto Black On/Off selectable
Dynamic Range 32x dynamic range enhancement
Dynamic Noise Reduction Auto, Off selectable
Contour Sharpness enhancement level selectable
BLC Off, area and level selectable
Gain Auto (maximum level selectable to 28 dB) or fixed level selectable
White Balance ATW (2500–10000 K), AWB hold, manual WB selectable
VMD Four (4) area, sensitivity selectable
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay Max. 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA
External Synchronal Input 75 Ohm or High Impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic setup in combination with coaxial communication)
Camera ID 16-character editable string, position selectable
Remote Control Bi-directional coaxial communication

UPH-C630 Series

Camera Model LTC 0630 Dinion 2X Day/Night, 1/2-inch Digital CCD Camera

Active Pixels

NTSC 768 H x 494 V
PAL 752 H x 582 V

Sensitivity (3200 K, scene reflectivity 89%, F1.2)

Full video(100 IRE)/ Usable picture (50 IRE)/Usable picture(30 IRE)
Color 1.4 lx (0.14 fc) / 0.31 lx (0.031 fc) / 0.18 lx (0.018 fc)
Color + SensUp 10x 0.14 lx (0.014 fc) / 0.031 lx (0.0031 fc) / 0.018 lx (0.0018 fc)
Monochrome - / 0.052 lx (0.0052 fc) / 0.024 lx (0.0024 fc)
Monochrome + SensUp 10x - / 0.0052 lx (0.00052 fc) / 0.0024 lx (0.00024 fc)
Horizontal Resolution 540 TVL
Signal-to-Noise- Ratio >50 dB
Video Output Composite video 1 Vpp, 75 ohm
Synchronization Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
Shutter Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
Day/Night Color, Mono, Auto
SensUp Adjustable from Off up to 10x
Auto Black Automatic continuous, Off
Dynamic Engine XF-Dynamic, SmartBLC
Dynamic Range 96 dB (16-bit image processing)
Dynamic Noise Reduction Auto, On/Off selectable
Sharpness Sharpness enhancement level selectable
AGC AGC On/OffOff (0 dB) selectable
BLC On/Off
Peak White Invert On/Off
White Balance ATW, ATWhold and manual (2500– 10000 K)
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +3.3 V nominal, +40 VDC max.
Alarm Output Relay 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA
External Synchronal Input 75 Ohm or High Impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial
communication
Camera ID 17-character editable string, position selectable
Test Pattern Generator Color bars 100%, Greyscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
Modes Six (6) preset programmable modes
Remote Control Bilinx coaxial bi-directional communication
Video Motion Detection One (1) area, fully programmable
Controls OSD with soft-key operation (multi-lingual)

Lens Specifications

Model L8585 (LTC 3783/51)

10x optical f=8.5 (wide) to 85.0 mm (tele), F1.6
Angle of view (H) 31.3° (wide) to 3.3° (tele)

Model L8120 (LTC 3293/30)

15x optical f=8.0 (wide) to 120.0 mm (tele), F1.6
Angle of view (H) 32.5° (wide) to 2.3° (tele)

Model L86154 (LTC 3793/51)

18x optical f=8.6 (wide) to 154.0 mm (tele), F2.5
Angle of view (H) 30.5° (wide) to 1.82° (tele)

AEGIS UFLED Illuminator Specifications

LEDs High-efficiency LED array with current limited integral power circuit
Number of LEDs 18 high-efficiency surface mount LEDs
Beam Patterns 10°, 20°, or 30°
Wavelength 850 nm
Power Draw 26 to 45 W (45 W max. power). Power consumption will vary over time due to the infrared illuminator’s optical output control which compensates for LED degradation and ambient temperature fluctuations.
Input Voltage 12 to 40 VDC or 24 VAC ±30%
Temperature Range –50°C to +50°C (-58°F to +122°F) max. on full power
Environment IP67
Construction Robust, aluminum construction with acrylic front fascia
Weight 1.4 kg (3.1 lb)
Dimensions (Single Illuminator) 152 x 188 x 115 mm (6.0 x 7.4 x 4.5 in.)
Color Black anodized heat sink with black front fascia
Power Cable Supplied with IP67 power connector and 5 m (16.4 ft) of connecting lead.
Bracket Wall mount U-bracket supplied

IR Performance Ranges

Model Combination/ Beam Pattern/Achievable Distance6
UFLED10-8BD UFLED10-8BD 10° 10° / 267 m (876 ft)
UFLED10-8BD UFLED20-8BD 10° 20° / 230 m (755 ft)
UFLED10-8BD UFLED30-8BD 10° 30° / 218 m (715 ft)
UFLED20-8BD UFLED20-8BD 20° 20° / 180 m (590 ft)
UFLED20-8BD UFLED30-8BD 20° 30° / 168 m (551 ft)
UFLED30-8BD UFLED30-8BD 30° 30° / 132 m (433 ft)

User Manual

Datasheet

Got any question or simply need help setting up something?

Head to our support forum

Support Forum

© Copyright 2015 The Protectors. All rights reserved.

Go to top: