Call Us: +92 51 11 11 BOSCH / Email: sales@theprotechtors.com

Bosch AUTODOME IP dynamic 7000 HD

2
  • High-resolution, full HD PTZ camera with 1080p resolution and high-performance 30x zoom lens for capturing fine details in scenes with limited or nonuniform illumination
  • Intelligent Tracking and alarm rules engine with onboard Intelligent Video Analytics (IVA)
  • Enhanced system flexibility with dual recording options (iSCSI, SD card) and dual power source options (High Power over Ethernet (High PoE) / 24 VAC)
  • Fully configurable quad streaming with individually configurable streams, based on Bosch’s Common Product Platform (CPP4)
  • Easy and intuitive installation with multiple preconfigured user modes that allow users to select the camera configuration that is ideal for their applications

The AUTODOME IP dynamic 7000 HD is an easy to install, high-speed PTZ dome camera, in a field-proven indoor/outdoor pendant housing or indoor in-ceiling housing, that delivers unmatched picture quality and network performance day and night with superb highdefinition (HD) 1080p25/30 video and 30x optical zoom.
The camera provides complete network-based control of all dome functionality including pan/tilt/zoom operation, presets, tours and alarms as well as webbased configuration of all dome settings. It also provides direct network video streaming using H.264 compression / bandwidth throttling to efficiently manage bandwidth and storage requirements while delivering outstanding image quality.

AUTODOME IP dynamic 7000 HD

Imager 1/2.8-type Exmor CMOS sensor
Effective Picture Elements (Pixels) 1944 x 1224 (2.38 MP)
Lens 30x Zoom 4.3 mm to 129 mm F1.6 to F4.7
Field of View (FOV) 2.3° to 65°
Focus Automatic with manual override
Iris Automatic with manual override
Digital Zoom 12x

Sensitivity / Minimum Illumination (typical)30 IRE /50 IRE

Day Mode (Color)

Fixed shutter 1/30, High Sensitivity mode On 0.066 lux / 0.209 lux
Fixed shutter 1/30, High Sensitivity mode Off 0.26 lux / 0.83 lux
Fixed shutter ¼, High Sensitivity mode On --- / 0.026 lux
Fixed shutter ¼, High Sensitivity mode Off --- / 0.104 lux
SensUp On, High Sensitivity mode On 0.0103 lux / 0.033 lux
SensUp On, High Sensitivity mode Off 0.041 lux / 0.104 lux

Night Mode (Black and white)

Fixed shutter 1/30, High Sensitivity mode On 0.033 lux / 0.104 lux
Fixed shutter 1/4, High Sensitivity mode On 0.0026 lux / ---
SensUp On, High Sensitivity mode On 0.00129 lux / 0.0041 lux

Additional Camera Settings

Gain Control Auto/Manual/Max
Aperture Correction Horizontal and vertical
Electronic Shutter Speed (AES) 1/1 sec to 1/10000 sec (22 steps)
Dynamic Range 90 dB typical
Signal-to-Noise Ratio >50 dB
Backlight Compensation (BLC) On/Off
White Balance 2000 K to 10,000 K ATW, AWB Hold, Extended ATW, Manual, Sodium Lamp Auto, Sodium Lamp
Day/Night Monochrome, Color, Auto
Defog mode feature Improves visibility when viewing foggy or other low-contrast scenes.

Mechanical

In-Ceiling/Pendant
Pan Range 360° cont. / 360° cont.
Tilt Angle 1° above horizon / 18° above horizon
Pre-position Speed Pan: 400°/s Tilt: 300°/s / Pan: 400°/s Tilt: 300°/s

Pan/Tilt Modes

Turbo Mode(Manual Control) Pan: 0.1°/s – 400°/s Tilt: 0.1°/s – 300°/s
Normal Mode 0.1°/s-120°/s / 0.1°/s-120°/s
Preset Accuracy ± 0.1° typ. / ± 0.1° typ.

Electrical

In-Ceiling /Pendant
Input Voltage 21-30 VAC, 50/60 Hz; (class II) High PoE (with Bosch Midspan (NPD-6001A); required to power the heater)
PoE+ (IEEE 802.3at, class 4 standard)
Power Consumption 24 W / 44 VA / 60 W / 69 VA (heaters on) or 24 W / 44 VA (heaters off / without heater connected in power supply box for indoor applications)

Surge Suppression

Protection on Alarm Inputs Peak current 17 A, peak power 300 W (8/20 μs)
Protection on Alarm Outputs Peak current 2 A, peak power 300 W (8/20 μs)
Protection on Relay Output Peak current 7.3 A, peak power 600 W (10/1000 μs)
Protection on Power Input (Dome) Peak current 7.3 A, peak power 600 W (10/1000 μs)
Protection on Power Output (Arm Power Supply) Peak current 21.4 A, peak power 1500 W (10/1000 μs)
10/100 Ethernet Data Lines Peak current 14 A, peak power 200 W (8/20 μs)

Software Control

Camera Setup/Control Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Recording Station (BRS), or Bosch Video Client (BVC)
Software Update Network firmware upload

Network

Communications Protocols Standard Bosch IP protocol, including ONVIF and SNMP v1
Standards / Video compression H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming Four (4) streams with individually configurable frame rate and resolution: • Two (2) independently configurable H. 264 recording streams • Two (2) non-recording streams (profiles)
Stream 1 (recording) Options are: - H.264 MP SD - H.264 MP 720p25/30 Fixed - H.264 MP 1080p25/30 Fixed; - H.264 MP 720p50/60 Fixed
Stream 2 (recording) Options vary depending on Stream 1 selection. Options with “H.264 MP 1080p25/30 Fixed” selected for Stream 1: • Copy Stream 1• H.264 MP SD • H.264 MP 720p8/10 Fixed • H.264 MP 1080p4/5 Fixed • H.264 MP upright (cropped) • H.264 MP D1 4:3 (cropped) Options with “H.264 MP 720p50/60 Fixed” selected for Stream 1: • Copy Stream 1 • H.264 MP SD • H.264 MP 720p6/7 Fixed • H.264 MP upright (cropped) • H.264 MP D1 4:3 (cropped) Options with “H.264 MP 720p25/30 Fixed” selected for Stream 1: • H.264 MP SD • H.264 MP 720p25/30 Fixed • H.264 MP upright (cropped) • H.264 MP D1 4:3 (cropped) • H.264 MP 1280x960 (cropped) Option with “H.264 MP SD” selected for Stream 1: H.264 MP SD
Non-recording profiles Two (2) streams, I-frame only Options are: - HD Image Optimized; - HD Balanced; - HD Bit Rate Optimized; - SD Image Optimized; - SD Balanced; - SD Bit Rate Optimized; - DSL Optimized; - 3G Optimized

Resolution (H x V)

1080p HD 1920 x 1080
432p SD 768 x 432
288p SD 512 x 288
144p SD 256 x 144
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (v1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selftHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication
Ethernet 10BASE-T/100BASE-TX, auto-sensing, half/ full duplex
Encryption TLS 1.0, SSL, DES, 3DES, AES
Ethernet connector RJ45
Connectivity ONVIF Profile S, Auto-MDIX
GOP Structure IP, IBP, IBBP
Data Rate 9.6 kbps to 6 Mbps
Overall IP Delay 240 ms

Audio/1 x mono line in, 1 x mono line out

Standard G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC, 16 kHz sampling rate
Signal-to-Noise Ratio >50 dB
Audio Streaming Bidirectional (full-duplex)
Signal line in 12 kOhm typical, 1 Vrms max
Signal line out 1 Vrms at 1.5 kOhm, typical

Local Storage

Memory Card Slot User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC)
Recording Continuous recording of video and audio, alarm/events/schedule recording

Fiber Optic Kit VG4-SFPSCKT

Description Fiber Optic Ethernet Media Converter kit 6. Requires a small form-factor pluggable (SFP) module (sold separately).
Data Interface Ethernet
Data Rate 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port Full Duplex Optical Port
Compatible Receiver CNFE2MC
Installation Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware

SFP Modules

Description Interchangeable modules available for use with MMF or SMF optical fiber.
Data Interface Ethernet
Data Rate 10/100 Mbps IEEE 802.3 Compliant

Miscellaneous

Sectors / Titling 16 independent sectors with a 20-character title/sector
Privacy Masking 24 individually configurable privacy masks
Pre-positions 256, each with a 20-character title
Guard Tours Two (2) types of tours: • Recorded tours – two (2) • Preset tour – one (1), consisting of up to 256 scenes, consecutively
Supported Languages English, Chinese, Dutch, French, German, Italian, Japanese, Polish, Portuguese, and Spanish

User Connections

Power, Camera RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) or PoE+ (IEEE 802.3at, class 4 standard) 21-30 VAC, 50/60 Hz
Power, Heater RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) 21-30 VAC, 50/60 Hz
Video and Control RJ-45 10/100 Base-TX Ethernet
Alarm Outputs (7) 2 supervised; 5 non-supervised Programmable for “normally open” or "normally closed"
Alarm Outputs (4) 1 dry contact relay; 3 open collector/ transistor outputs 32 VDC @ 150 ma max.

Environmental Note: Unit includes internal heater and fan.

In-Ceiling (with acrylic bubble)Pendant (with acrylic bubble)
IP54, Plenum rated IP66,,NEMA 4X 7
Ingress Protection Rating/ Standard NEMA 4X for: • Access to Hazardous parts • Ingress of solid foreign objects (falling dirt, circulating dust, settling dust) • Ingress of water (dripping and light splashing, hosedown and splashing) • Corrosive agents
Operating Temperature `-10 °C to 40 °C (14 °F to 104 °F) / -40 °C to 55 °C (-40 °F to 131 °F) or -10 °C to 50°C (14 °F to 131 °F) 8
Storage Temperature `-40 °C to 60 °C L124(-40 °F to 140 °F) / -40 °C to 60 °C (-40 °F to 140 °F)
Humidity 0% to 90% relative, noncondensing / 0% to 100% relative,condensing

Construction

Dimensions/See dimensional drawings

Weight/ In-ceiling/2.58 kg (5.69 lb)

Indoor/Outdoor Pendant 3.06 kg (6.75 lb)
Bubble Size 153.1 mm diameter (6.03 in.)

Construction Material

Housing In-ceiling: Magnesium Pendant: Cast aluminum
Bubble In-ceiling: HD High-resolution acrylic Pendant: High-resolution acrylic
Standard Color White (RAL 9003)
Standard Finish Powder coated, sand finish

Mounts/Accessories

Bubbles/ In-ceiling

Clear HD high-resolution acrylic VGA-BUBHD-CCLA
Tinted HD high-resolution acrylic (Included with in-ceiling camera models.) VGA-BUBHD-CTIA

Pendant

Clear high-resolution acrylic (Included with pendant camera models.) VGA-BUBBLE-PCLA
Tinted high-resolution acrylic VGA-BUBBLE-PTIA

Pendant Arm Mounts

Wall Arm (No Transformer) VG4-A-PA0
Wall Arm (120/230 VAC Transformer) VG4-A-PA1 / VG4-A-PA2
Pendant Arm with Wiring VGA-PEND-ARM
Mounting plate for VGA-PEND-ARM VGA-PEND-WPLATE
Trim skirt for VG4 Series Power Supplies VG4-A-TSKIRT

Optional Mounting Plates for Arm Mounts

Corner Mounting Plate VG4-A-9542
Mast (Pole) Mounting Plate VG4-A-9543

Pendant Pipe Mounts

Pipe Mount Cap VG4-A-9543

Pendant Roof Mounts

Roof (Parapet) Mount VGA-ROOF-MOUNT (1.5-inch NPT tapered male threads)

Optional Mounting Plates for Roof Mounts

Flat Roof Adapter for Parapet Mount LTC 9230/01

In-ceiling Support Kits

Bracket for suspended or drop ceilings VGA-IC-SP

Power Supplies

High PoE Midspan 60W, single port, AC in NPD-6001A
Outdoor Power Supply Box, no transformer VG4-A-PSU0
Outdoor Power Supply Box (120/230 VAC Transformer) VG4-A-PSU1 / VG4-A-PSU2
Fiber Optic Kit VG4-SFPSCKT

Dimensions (LxWxH)

SFP-2 and SFP-3 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
SFP-25, SFP-26 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
Weight (all SFP modules) 0.23 kg (.05 lb)
Type/Connector/ Wavelength (T/R)/Max. Distance
SFP-2 MMF / Duplex LC / 1310 nm /1310 nm / 2 km (1.2 miles)
SFP-3 SMF / Duplex LC / 1310 nm / 1310 nm / 20 km (12.4 miles)
SFP-25 MMF / Single SC / 1310 nm / 1550 nm / 2 km (1.2 miles)
SFP-26 MMF / Single SC / 1550 nm / 1310 nm / 2 km (1.2 miles)

Fiber Compatibility

Optical Fiber Compatibility, MMF 50/125 μm MMF. For 50/125 μm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651.
Optical Fiber Compatibility, SMF 8–10/125 μm SMF. Must meet or exceed fiber standard ITU-T G.652.
Optical Distance Specifications Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.

User Manual

Datasheet

Got any question or simply need help setting up something?

Head to our support forum

Support Forum

© Copyright 2015 The Protectors. All rights reserved.

Go to top: